Re: what is a crowsfoot wrench?

[Enrique Claure <spaninc@ceibo.entelnet.bo>]

I am not quite sure the previous definitions of crowfoot wrench fit in my
book. From my catalogs crow foot wrench are basically the head of a C type
wrench without the body where you fasten your hand around. Instead they
have a 1/2"(usually) square opening that will fit a ratchet or torque
meter. They can not be used by hand and must be attached to a ratchet. The
purpose of these wrenches is to fit them where regular sockets wont fit and
were you need specific torque settings. Enrique.