mgs
[Top] [All Lists]

Engine turning

To: mgs@autox.team.net
Subject: Engine turning
From: Florrie & Allen Bachelder <bachldrs@swva.net>
Date: Wed, 12 May 1999 17:19:12 -0400
Enrique -

That's 'cause when crank is vertical, piston travel/friction is at a
minimum (piston travel per degree of crankshaft rotation).  It's at a
maximum when crank is horizontal.

My 2...

Allen

From: Enrique Claure <spaninc@ceibo.entelnet.bo>
>
>Hi List, I just finished building the bottom of my 77B engine and cant stop
>wodering how smooth it should turn when I turn the crank. I noticed that
>when the crank and rods are in a vertical position the engine turns easier.
>I had the crank and block checked for alignment, got a new crank,bearings,
>pistons, rings,cam,timing sprockets,chain,tensioner, quality torq rench.
>Any tips before I put the oil pan will be appreciated, Regards, Enrique
>

******************************************
         Allen H. Bachelder  =iii=<
         Sinking Creek Home for Wayward MGs
         New Castle, VA 24127
         USA
         540/544-7333
******************************************



<Prev in Thread] Current Thread [Next in Thread>