[Top] [All Lists]

RE: Cleaning wireing connectors

To: "''" <>,
Subject: RE: Cleaning wireing connectors
From: Hans Duinhoven <>
Date: Tue, 25 May 1999 08:06:07 +0200

Get rid of the old black receptacles whering the bullet connectors go into.
When these are old they prone to poor contacts because they have become
brittle after all those years.
This prevents future trouble.
Check if all bullets still are well soldered to the wire.

Good luck.

'71 BGT 

> -----Original Message-----
> From: []
> Sent: Tuesday, May 25, 1999 5:03 AM
> To:
> Subject:      Cleaning wireing connectors
> I am planning to clean all of the wire connectors while I have all the
> wireing out of my B. Would appreciate some ideas on the best procedure to
> accomplish this.
> Thanks
> R.B. Sexson
> 74.5 B

<Prev in Thread] Current Thread [Next in Thread>