Moss sells an item called a blind fix. These are small plastic "sockets"
that you press into the mounting holes, then you position the mesh, then
press the studs of the grille down into the plastic sockets. Works like a
British Sportscar Center
From: chief bootknocker <firstname.lastname@example.org>
To: email@example.com <firstname.lastname@example.org>
Date: Friday, June 25, 1999 5:59 AM
Subject: Air intake grill
>I just bought a wire mesh cutout to put under my air intake grill and I was
wondering if anyone has some good suggestions on how to put the retaining
clips back on. The dilemma, if you haven't done it, is how to get the clips
in - if the mesh is not present you just slip you fingers through the top of
the grill and press them onto the posts. With the mesh in the way this is
>I talked to a guy who had it on his air intake grill, but he said that the
mesh worked like a retention clip on his and he did not use the clips. Mine,
however is lose when everything is in place.
>"Free web-based email available now at http://www.theglobe.com"