[Top] [All Lists]

Re: Removing fenders

To: patrick bailey <>
Subject: Re: Removing fenders
From: john peloquin <>
Date: Thu, 8 Jul 1999 09:08:49 -0700 (PDT)
Dear Patrick,

There are two bolts inside behind the dashboard. To get the left fender
off, you can remove a switch and get at the bolt, however, to deal with
the bolt on the right, you pretty much have to remove the dashboard.
Neither Hanynes, nor the Bently manual show all these bolts. A Vicky B
or Moss catalog might show you that there are two back up in there near 
the dash.

I just did this last month. Definately a PITA.    :-(

"Never ascribe to Malice that which can be explained by Ignorance."
John J. Peloquin, Assistant Research Entomologist
Entomology, University of California, Riverside, CA 92521

On Fri, 2 Jul 1999, patrick bailey wrote:

> Hi all
> My son and I decided to start pulling
> the damaged wings etc offf his '71 BGT
> and we got stuck right away we pulled
> all the bolts from the top in the engine
> cmpt pulled the bolt inside the front
> near the dashboard but it still is stuck
> my haynes doesn't show where all the
> bolts are any help will be appreciated.
> Thanks Pat & Brian

<Prev in Thread] Current Thread [Next in Thread>