[Top] [All Lists]

Re: Kick Panel, quick question

To: Bob Howard <>
Subject: Re: Kick Panel, quick question
From: Bud Krueger <>
Date: Wed, 06 Feb 2002 14:26:39 -0500
Hi Bob,

   Absolutely!  As I recall, there are two or three bolts along the inner edge
and a 10-32 screw at the bottom.  There is a rubber seal (Moss 282-360/370)
around the edge between the panel and the fender.  If you look immediately
toward the fender area from the wheel, you are looking at the splash panel.  The
joint is probably covered with detritus or undercoating so as to be
unnoticeable.  It took me a few tries to find it when I wanted to install the
automatic antenna into my 77.  It was some other listers who kept me looking.
BTW, I have a left over left side seal (new)on my list of things at


Bob Howard wrote:

> Bud,
>   Can that inner fender/door jamb panel be removed w/o removing the
> fender first?  I would like to check that area in my GT, but have been
> reluctant to undertake the task. Thanks for the encouragement--now I just
> need to know how complicted it is. And some warm weather.
> Bob
> On Wed, 06 Feb 2002 07:38:34 -0500 Bud Krueger <>
> writes:
> > Will,
> >
> >      Don't forget about the splash panels (Moss MGB-15, Page 119,
> > Item #1).
> > Removing the panel provides access to the inner fender/door jamb
> > area.

/// mailing list
///  or try

<Prev in Thread] Current Thread [Next in Thread>