In a message dated 9/8/02 11:09:49 AM Eastern Daylight Time, firstname.lastname@example.org
> Having never done any of this before, I can use any advice others have.
> I pump all the fluid out before I start?
> << snip >>
> BTW, I found out last week that a wire spoke wrench will fit the brake
> adjusting nuts and gives one good torque.
- - - - - - - - - -
Don't worry, all the fluid will come out, one way or the other!
Buy a Flare Nut wrench in the correct size. A flare nut wrench is an open
end wrench with 5 flats instead of 4. You need 5 flats to keep from damaging
SCCA Philly Region Rally Steward
'75 Midget "The Project"
'92 Mitsubishi Expo LRV Sport
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive