Hi, Rich,
I have a used crank that is still at standard grind on all the journals.
It's a couple of thou undersize here and there so it will need a regrind but
all the journals will easily go to 10 under with no problem.
Does $175 including ground UPS sound fair?
Lawrie
British Sportscar Center
----- Original Message -----
From: "Richard" <ramsmgb@cox.net>
To: <mgs@autox.team.net>
Sent: Wednesday, June 02, 2004 9:56 AM
Subject: crank shaft needed
> Hi all,
>
> I just found out from my engine rebuild shop that my crank had been ground
> to the max at one bearing point (a no-no), so I need a replacement. Does
> anyone out there know of a used crank available for a 18V 5 main bearing
> engine?
>
> Rich
> 72 B
> Tucson, AZ
|