mgs
[Top] [All Lists]

Re: crank shaft needed

To: <mgs@autox.team.net>
Subject: Re: crank shaft needed
From: "Steven Devine" <stevedevine@rcn.com>
Date: Thu, 3 Jun 2004 19:27:38 -0700
Ive got a crank out of a 65 B you can have it for $50.
Im in Boston. Mass.


> You should be able to locate and buy a used one. When I had this problem,
> many years ago, I was able to buy a short block from a salvage yard. But
> you may not have to go that far.
>
> I did notice that British Masters sells used crank shafts for $200 -
> http://www.usedbritishcarparts.com/main/mgb.htm
>
> I haven't dealt with them yet but you can use that for reference or for a
> starting point. But being that you are in Tucson, you may even have a
local
> or somewhat local supplier of used parts.
>
> David Councill
> 67 BGT
> 72 B
>
> At 09:56 AM 6/2/2004 -0700, Richard wrote:
> >Hi all,
> >
> >I just found out from my engine rebuild shop that my crank had been
ground
> >to the max at one bearing point (a no-no), so I need a replacement.  Does
> >anyone out there know of a used crank available for a 18V 5 main bearing
> >engine?
> >
> >Rich
> >72 B
> >Tucson, AZ





<Prev in Thread] Current Thread [Next in Thread>