mgs
[Top] [All Lists]

MGA master cylinder rebuild

To: "'MG List'" <mgs@autox.team.net>
Subject: MGA master cylinder rebuild
From: "Howard Battan" <battanhr@comcast.net>
Date: Mon, 3 Oct 2005 11:50:32 -0700
I'm still fighting my MGA master brake/clutch cylinder rebuild. I cleaned up
the MC and honed out the cylinder bore to clean them up well. Then I put in
a new rebuild kit. The problem is that when I push the pistons into the
bores, they do not return. I need to use air pressure to get them back out
to the unloaded position. BTW, this is on the bench, not on the car.

What am I doing wrong? Any hints?

Thanks

Howard Battan
'57 MGA
'79 MGB




<Prev in Thread] Current Thread [Next in Thread>