Re: [oletrucks] hole in steering column

[MKlepp4335@cs.com]

Trucks with 4-speeds had no elongated hole (slot) in the column, only the 
3-speed columns shifters.  I know because I recently switched my original '48 
4-speed to a 3-speed column shifter.  I had to put in the slot because it 
serves as an anchor point for the linkage so it won't slip.  Hope this helps.
Mike Klepp
'48 3100
Wichita Falls, TX
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959