Allen,
Are you using the damper from Buffalo Enterprises? I ordered one from him
last week. Are you using a short water pump? My motor will be going into
my 56 (long water pump). Makes me wonder if I'm going to have to cobble my
fan also.
Mike
<-----Original Message-----
<From: Allen L. Jones [mailto:ALJ@hartcrowser.com]
<Sent: Friday, September 17, 1999 10:32 AM
<To: oletrucks@autox.team.net
<Subject: Re: [oletrucks] Fan speed and less roar
<
<
<I had to trim the blades on the stock fan of my 261 to miss
<the double groove harmonic balancer (trimmed off the back of
<each blade and a circular arc at the ends). I used a mower
<blade balancer to check my work and trim more as necessary.
<It worked pretty good. Followed by having my machinist flux
<for cracks.
<
<Allen in Seattle
<'50 3100
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|