Now that depends on the make and model of the signal Switch. Some are
actually located inside of the switch! Other's are located just under the
dash somewhere by the gauges. The easiest way to tell is turn the signal on
"if the flasher is good" and listen for the clicking sound. If all else
fails, just following the signal wires down the column and they should end
up and the flasher.
----- Original Message -----
From: <BDober@aol.com>
To: oletrucks list <oletrucks@autox.team.net>
Sent: Saturday, January 08, 2000 8:52 PM
Subject: [oletrucks] Where Is the 6V Flasher on 54 AD
> Having converted over to 12V system, never saw any mention of needing to
> replace the flasher unit for directional signals. Question is would a 6V
burn
> out and where is it, looked under and around dash and don't see anything
that
> looks like a flasher??
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|