I went a step further on mine. I first sandblasted the whole frame, then
used an etching primer filler, then DP-90 then a Semi-gloss urethane
topcoat. It all depends on how far you want to go and how much time and
money you are willing to spend. I wanted the additional protection of the
hard coat over the DP-90.
1950 3100 * 1949 3600
----- Original Message -----
From: "Joe Clark" <firstname.lastname@example.org>
Cc: "Steven R. Goss" <Steve@AZscholarships.org>; <email@example.com>
Sent: Friday, May 19, 2000 1:33 PM
Subject: Re: [oletrucks] Chassis Paint
> PPG makes it. It's an epoxy primer, good stuff.
> On 19 May 00, at 14:25, Tom3600@webtv.net wrote:
> > Joe -
> > Who makes the DP-90 Black Primer....It's not Dupont. My body man can't
> > seem to find it.
> > Thanks,
> > Tom Poterack
> > Moline, IL.
> > '49 Chevy 3600
> > http://www.chevytrucks.org/users/wayne/tom49.jpg
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> Joe Clark
> '50 3100 Deluxe
> Knoxville, Tennessee
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959