oletrucks
[Top] [All Lists]

Re: [oletrucks] Bed Bolt sizes on 58 Fleetside

To: "Edward Miller" <edngael@open.org>,
Subject: Re: [oletrucks] Bed Bolt sizes on 58 Fleetside
From: "Stephen" <slb1@humboldt1.com>
Date: Fri, 14 Jul 2000 00:23:59 -0700
The only mention for Fleetside dimensions on the Ole Trucks website states,
"there are 12 boards ranging from 5" to 7" in width."   The actual width of
boards can be figured by measuring between the bolt holes in the cross bed
supports, allowing for the bolt width and subtracting some for movement.
The dimensions of the groves listed on the site shows how the dados need to
be cut to for the bed strips to be located and held in place.


Stephen
'50 Chevy Suburban
'58 Chevy Fleetside

Arcata, California


Subject: [oletrucks] Bed Bolt sizes on 58 Fleetside


> Stephen, where in the web site did you find dimensions for a Fleetside
> truck, long or short bed?  I couldn't find any for a Fleetside, tho I
> found the dimensions for a step side.
>
> Ed Miller
> '58 Apache Short Fleetside (bad wood)
>
> Stephen wrote:
>
> "Hello,
>
> I am ready to replace the bed wood and strips on my '58 Fleetside long
> bed.
> I will mill the bed wood myself following Chevytrucks.org dimensions.
>
> Stephen"
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>