oletrucks
[Top] [All Lists]

[oletrucks] Measurement please (task force)

To: "'oletrucks@autox.team.net'" <oletrucks@autox.team.net>
Subject: [oletrucks] Measurement please (task force)
From: "BORDER,RYAN (HP-FtCollins,ex1)" <ryan_border@hp.com>
Date: Thu, 27 Jul 2000 13:13:41 -0600
Hello guys-
  I have an opportunity to buy some new rear wheels for my truck at a pretty
good price.  However, I have concerns about if they're going to fit.  What I
need to know, is how wide (outside sidewall to outside sidewall) the rear
wheels/tires/axle combo can be, and still fit inside a stock set of task
force step-side rear fenders.  The measurement I'm looking for is probably
around 70 inches.  Any of you rodders, with tires that fit, got an 8ft dial
caliper handy?  :-)
  I've got a narrowed frame, have a pretty good idea what the outboard
suspension components width is going to be, and can tub the bed so that the
suspension *is* the inside limitation.  I will have the axle narrowed to
suit... The wheels I'm looking at are 15X15's though, which still might be a
bit tight.  The tires I'd run on them would be M/T 31X18.5X15 Sportsmans (or
Hoosier/Phoenix/Goodyear equivalents), which have a sidewall width of ~18".
The limiter looks to be the rear lower corner of the wheel well opening...

Culled from the pages of "Classic Trucks":
http://www.classictrucksweb.com/
(hopefully a shameless plug will keep them from suing me)
is a picture that approximates what I'm shooting for:
http://home.earthlink.net/~rborder/truck/rc.jpg

Thanks-
Ryan. 
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>