Thanks Gwyn,
Yes I could do that, just hoping somebody might have a couple of old
knobs kicking around. Set screws would work too. I guess I am guilty of
"cyber-laziness", but by the time I drive around to find shim stock and make
the spacer sleeves, all of my other projects and honey-do's are on hold....
Jack
----- Original Message -----
From: "Gwyn Reedy" <mgr@mgrcorp.com>
To: "Jack Halton" <safesix@earthlink.net>; "oletrucks"
<oletrucks@autox.team.net>
Sent: Monday, August 28, 2000 8:53 AM
Subject: RE: [oletrucks] Need radio parts
> Jack,
>
> Couldn't you make some sleeves out of 1/32 shim stock?
>
> Gwyn Reedy
> Brandon, Florida
> mailto:mgr@mgrcorp.com
>
> -----Original Message-----
> From: owner-oletrucks@autox.team.net
> [mailto:owner-oletrucks@autox.team.net]On Behalf Of Jack Halton
> Sent: Monday, August 28, 2000 8:18 AM
> To: oletrucks
> Subject: [oletrucks] Need radio parts
>
>
> Hi All,
>
> I had my AD radio converted to a solid-state stereo, and bought all
new
> knobs (old ones were missing) and pushbuttons. The knobs are for a 1/4"
> shaft, but my shafts are 3/16". I asked the vendor, who replied that
> original knobs had a metal sleeve to reduce the shaft size, and these
aren't
> included with the new knobs.
>
> Anyone have a pair of gnarly old original radio knobs with these
sleeves
> intact?
>
> Jack Halton
> 51 GMC 1/2 ton
> Winter Park FL
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|