oletrucks
[Top] [All Lists]

Re: [oletrucks] Installing valve cover gasket

To: "Charles Culver" <sculver@iwl.net>,
Subject: Re: [oletrucks] Installing valve cover gasket
From: "JULIE HUBER" <JHUBER@alltel.net>
Date: Sun, 29 Oct 2000 18:06:00 -0000
if valve cover is in good shape, no bent edges, use gasket by its self.
Greg in Fla
56 short
-----Original Message-----
From: Charles Culver <sculver@iwl.net>
To: oletrucks list <oletrucks@autox.team.net>
Date: Sunday, October 29, 2000 9:16 PM
Subject: [oletrucks] Installing valve cover gasket


>This sounds like a dumb question, but I need to know.  I had to pull my
>valve cover off because the blue silicone gasket material that I had
>originally used just didn't work.  Now I have a thick cork gasket to
replace
>it with, but I don't know if it's necessary to use anything like Permatex
or
>a light coat of the silicone, or can I just tighten it down without
>anything?
>
>Thanks!
>
>Smokey Culver, League City, Texas
>'50 3600 5-window (mine)
>'58 Apache (hers)
>See 'em at:  http://sites.netscape.net/ChrlsCul/homepage
>
>
>
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>


oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>