oletrucks
[Top] [All Lists]

RE: [oletrucks] tappet adjustment

To: "'New Mexico Jim'" <ADvent@thuntek.net>
Subject: RE: [oletrucks] tappet adjustment
From: "Hanlon, Bill" <Bill.Hanlon@COMPAQ.com>
Date: Fri, 10 Nov 2000 09:19:31 -0600
Wool carpet then.  Today you'd probably use a synthetic 
of some kind to be compatible with your oil.

-----Original Message-----
From: New Mexico Jim [mailto:ADvent@thuntek.net]
Sent: Friday, November 10, 2000 8:39 AM
Cc: oletrucks-digest@autox.team.net
Subject: Re: [oletrucks] tappet adjustment


        In my teen-age years, I used to cut a piece of carpet and stick it
in
the valve cover. Can you say "HACK"?

Allen Jones wrote:
> 
> In days gone by, a dampener could be purchased and used inside the valve
> cover.  It bolted to the top of the rockers to muffle valve lash noise (a
> big rectangular thing).  I've only seen a couple of these as they are very
> scarce.  I guess one could be cobbled up.
> 
> Even though there is considerable valve noise (compared to a modern
engine),
> it's normal, so I don't worry about it for stock and medium warm inline
> builds.
> 
> Allen in Seattle
> '50 3100
> 
> ----- Original Message -----
> From: <237459N@knotes.kodak.com>
> To: <Passnb4U@aol.com>; <oletrucks-digest@autox.team.net>
> Sent: Thursday, November 09, 2000 4:51 AM
> Subject: [oletrucks] tappet adjustment
> 
> >
> >
> > From: W P. Fricke
> >
> > I wish you luck and would like to hear the outcome. I did an adjustment
to
> > my '53 this summer. It was noisy, otherwise ran well (very well). I
warmed
> > up the engine thorougly, running around town doing chores. I dove into
the
> > garage with it and had my son bump the engine. I went through each valve
> in
> > the correct order according to specs. I remember one intake valve and
one
> > exhaust valve that were out of spec. I hoped those to be the causes of
my
> > clacking. I buttoned it up with a new cork gasket and ended up with
> > basically the same performance as before: runs well but noisy. So what's
> > the problem and whats the solution?
> >
> > Good luck and let us know how you make out.
> >
> > Patrick
> >
> >
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >
> 
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>