On my 52' I used an orginal pedal power setup from "Norwest Pickups" it
worked just fine. Also the tech ad you were thinking of is at
http://www.classictruckshop.com
Shawn
>From: "CHARLES A. CLARK" <CHARLES_A._CLARK@HUD.GOV>
>Reply-To: "CHARLES A. CLARK" <CHARLES_A._CLARK@HUD.GOV>
>To: oletrucks@autox.team.net
>Subject: [oletrucks] Power brakes for AD
>Date: Fri, 22 Dec 2000 10:58:01 -0500
>
>Tried to put a power brake set up from Carters into my 49 panel and it will
>not
>clear the transmission cross member (stock). Also, there is not enough
>room at
>the stock location (even if it would clear the cross member) for Patricks
>floor
>shift mechanism for the saginaw transmission (which I have installed).
>Anyone
>else have this problem. Am thinking of going to the firewall but will need
>swing pedals. DId any year chevy trucks have swing pedals. Otherwise may
>have
>to use f@#d. Saw the tech article from one of the classic web sites (can't
>remember which one at the moment) where they used a setup from a 69 f@#d
>truck.
>
>Any insights would be appreciated.
>
>Thanks and have a happy and safe Holiday.
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
_________________________________________________________________
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|