In a message dated 1/6/01 12:12:26 AM Central Standard Time,
NTemple46@aol.com writes:
<< The passenger side mounting bolt can't be installed while the harmonic
balancer is in place. Is the HB hard to remove/reinstall, or should I just
bring the mount bolt up from the bottom, and use a castle nut and cotter pin
for added security? >>
The harmonic balancer isn't the problem, it's the cam gear cover that's in
the way. It must be removed to get the bole in. A bolt from the bottom
would work.
Mike Klepp
'48 3100
Wichita Falls, TX
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|