oletrucks
[Top] [All Lists]

[oletrucks] Generator pulley

To: oletrucks@autox.team.net
Subject: [oletrucks] Generator pulley
From: Pastorjon994@cs.com
Date: Sat, 7 Apr 2001 15:31:25 EDT
While inspecting my wobbling fan pulley, I noticed that the crankshaft pulley 
and the fan pulley are 3/4" and my generator pulley is only 3/8".  Hence a 
3/8" belt. Looks like somebody made do. Any ideas on where to get a 3/4" 
pulley for my 6v generator.

Also, one of the fan blades is cracked near the base.  Looks like it could be 
welded or brazed.  Anyone ever done this before, any comments would be 
appreciated.  The crack runs across the blade about 1/4" in from shaft hole 
at the bottom of the raised strengthening form in between two of the bolt 
holes.  Clear as mud?

Jon Callahan
'50 3100
Champaign/Urbana, IL
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>
  • [oletrucks] Generator pulley, Pastorjon994 <=