[Top] [All Lists]

[oletrucks] Gear Ratio problem

To: oletrucks@autox.team.net, napco4x4@egroups.com
Subject: [oletrucks] Gear Ratio problem
From: CLLLSLS@aol.com
Date: Tue, 1 Jan 2002 22:02:55 EST
Hey everyone,

Were there ever 4.10 gears available for the 55-62 corporate drop out center 
axles and/or the NAPCO front axles (They are the same gears I assume?) 

I've found a 58 GMC semi floater Dana 60 It has 3.54 gears and a powrlock 
posi. My problem is the NAPCO front axle in my 59 has 3.90 gears and as far 
as I know, 3.90 gears are not available for the Dana 60. The Dana 60 is my 
rear (and front axle) of choice as I have one under every vehicle I own as 
well as an extra set of 4.10 gears. 

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>
  • [oletrucks] Gear Ratio problem, CLLLSLS <=