I can't believe I'm having to ask this, but I'm stumped. The brake lights on
the '58 quit working, so I decided to re-wire everything back to the tail
lights. Now I have tail lights and turn signals, but when I wire in the brake
lights, it closes the circuit between the two sides, and both sides blink.
I have 3 wires going to the tail lights. One wire splits and goes to both
tail lights on the dim side of the bulb. I have one wire to the bright side
on the left for the left blinker, and one wire to the bright side on the right
for the right blinker. How do I go from the brake light switch to the bright
side of both tail lights now without interfering with the blinkers?
Thanks in advance-
Smokey Culver
League City, TX
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|