oletrucks
[Top] [All Lists]

RE: [oletrucks] Re: why you can't keep the floor starter...

To: oletrucks@autox.team.net
Subject: RE: [oletrucks] Re: why you can't keep the floor starter...
From: Bruce Kettunen <bekett@uslink.net>
Date: Sun, 9 Mar 2003 21:46:26 -0600
According to the 57 factory service manual, 6's with standard transmissions 
got floor push button starters.  Everything else got one of two styles 
of solenoid starters.

The solenoid starters got an off-on-start ignition switch.

Bruce K
57 3200
Mt. Iron, MN

At Sunday, 9 March 2003, you wrote:

>So what did trucks that came from the factory with V8's have so 
start them?
>Not a floor starter?
>
>-----Original Message-----
>From: owner-oletrucks@autox.team.net
>[mailto:owner-oletrucks@autox.team.net]On Behalf Of GremlinGTs@aol.com
>Sent: Sunday, March 09, 2003 3:29 PM
>To: oletrucks@autox.team.net
>Subject: [oletrucks] Re: why you can't keep the floor starter...
>
><< Too bad you can't keep the floor starter; I still don't understand 
why
> not.  Is it because the V8 starter uses a cylinoid and the 6 doesn't? 
I
> have a hole in the floor board I need to plug one of these days....
> Ed Miller >>
>
>    The reason is, the starter on the 6-cylinder is on the side 
of the 6
>cylinder motor with no obstruction straight up ( hence Straight 
6 ), whereas
>on the V-8, you have an overhanging block with 4 pistons ( V-shape vs.
>Straight ), so there's no way the starter can be mounted high up 
enough to
>use the original location, the starter is now lower, almost under 
the motor.
>The starter mounts to the block, NOT to the transmission, so due 
to that
>change, there is no physical way the floor starter can be used again,
as the
>V-8 starter is physically lower down now.  The 6 starter uses the floor
>pedal
>as the solenoid, true, but due to the lower mounting position, none 
of the
>hardware will reach the hole, even if the 6 starter is capable of 
fitting a
>V-8 block. The 6 starter is straight up and down, whereas I think 
the V-8
>starter has the solenoid cocked over to the side a bit to clear the
>overhanging cylinder wall of the block, so the foot mechanism might be
>tilted
>off to one side, even if you could mount it to a V-8 starter.
>    That's my assessment and I'm stickin' to it. :)
>
>Jerry in Virginia
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>




===================================================================
EASY and FREE access to your email anywhere: http://Mailreader.com/
===================================================================
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>