oletrucks
[Top] [All Lists]

Re: [oletrucks] My brake pedal sticks, still

To: "Joe Garcia" <joegarcia1@comcast.net>, <Old-Burb-club@yahoogroups.com>,
Subject: Re: [oletrucks] My brake pedal sticks, still
From: "Steve Hanberg" <steve@OldSub.com>
Date: Tue, 1 Apr 2003 22:09:22 -0800
So how is it that you can respond to my message before I even see my message
posted?

I've tried that once, and I guess I can go stronger, though I don't want to
loose the ability to operate the brakes.  Do you have a sense of how strong
a spring I can use, and more important, how to know what I'm buying?

The current spring is a Schuck's generic pedal return spring.

----- Original Message -----
From: "Joe Garcia" <joegarcia1@comcast.net>
To: "Steve Hanberg" <steve@OldSub.com>; <Old-Burb-club@yahoogroups.com>;
"OleTrucks mailing List" <oletrucks@autox.team.net>
Sent: Tuesday, April 01, 2003 9:41 PM
Subject: Re: [oletrucks] My brake pedal sticks, still


How about adding a stronger return spring.


----- Original Message -----
From: "Steve Hanberg" <steve@OldSub.com>
To: <Old-Burb-club@yahoogroups.com>; "OleTrucks mailing List"
<oletrucks@autox.team.net>
Sent: Tuesday, April 01, 2003 8:36 PM
Subject: [oletrucks] My brake pedal sticks, still


> The brake pedal on my '55 1st Suburban sticks.
>
> It seems to be hanging on the pivot just a little short of returning to
full
> rest.  It doesn't do it all the time, and seems only to do it if I have
> stopped a little harder, like a light changes when I still should stop,
but
> might have been a little close.  So I think it has something to do with
being
> pushed a little further than normal.
>
> This problem began at the same time I installed a dual master cylinder
using
> the CPP conversion bracket.  I think the bracket is forcing the plunger a
> little further toward the center of the truck than stock, and maybe
causing
> the pedal to bind on the pivot.  But its not sticking at the furthest
> depression, but rather when its been depressed further it does not return
> quite all the way to full rest.
>
> Anyone have any similar experience?  Anyone have any ideas?
>
> Motor is a 60ish GMC 270 with what appears to be the original 4-speed
behind
> it, and I do have the original clutch pedal and associated parts in place.
> I've replaced the brake return spring and that made no significant
difference.
>
> Should I just put a stronger spring on it?
>
> Steve@OldSub.com
> www.OldSub.com
> '54 Chevrolet 3100
> '55.1 GMC Suburban
> '72 Chevrolet C10
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>