I will go outside and take a picture of one or two for you and get back to
you in a bit.
Joe
----- Original Message -----
From: "Michael E. Mendonga" <mm@service-quality.com>
To: "Oletrucks" <oletrucks@autox.team.net>
Sent: Wednesday, April 16, 2003 8:00 AM
Subject: [oletrucks] Spare Tire Bracket
> Okay,
>
> Now I need some clarification from the group. The spare tire bracket I
> previously described which I've determined is for the under bed, has a
small
> triangular panel with three lug bolts on it on one end. On the other end,
> there are two angle irons connected to the triangular side via 4 rods.
> The angle irons are too large to fit in the side of the exposed bed
portion
> so either it's a bogus piece or it's for the under side of the bed.
>
> Additionally, I'm told that the side mount bracket looks more like a wheel
> hub. There are three holes in the side of the bed to accomodate the
bracket
> so the mount must match this.
>
> Can anyone provide some additional clarification / explanation as to the
> two different brackets?
>
> Thanks.
>
> Michael
> '54 Chevy 3100
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|