[Top] [All Lists]

[oletrucks] another note about jim carter parts....

To: Ie61pah@aol.com, wayne@chevytrucks.org, oletrucks@Autox.Team.Net
Subject: [oletrucks] another note about jim carter parts....
From: JMungon@aol.com
Date: Sat, 30 Oct 2004 15:37:49 EDT
i have always had good service from them, BUT  the headlight  assemblies i 
got from them are really poor quality.  the tub was not deep  enough to allow 
the sealed beam to settle into the holder, so had to make  it  3/8 inch deeper 
to allow room for the plug on the back of the seal  beam....and the chome rings 
which hold the sealed beam in place are larger  diameter than the sealed beam 
by 1/4 inch...soooo they dont hold firmly.  i  finally bought some used 
original equipment that works just fine....happy  motoring to alll....jerry ..  

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>
  • [oletrucks] another note about jim carter parts...., JMungon <=