I found the tips at
http://www.matcotools.com/Catalog/toolcatalog.jsp?cattype=T
Lee
----- Original Message -----
From: "Mark Noakes" <mark@noakes.com>
To: <Jackpft@aol.com>; <oletrucks@autox.team.net>
Sent: Sunday, August 28, 2005 5:18 PM
Subject: Re: [oletrucks] Tools
> It's called a clutch head driver. I think that they only come in
screwdriver format and not as sockets. Some of the old truck parts vendors
have them; some of the serious hardware stores have them...however not
typically found in the franchise superstores.
>
> Mark Noakes
>
> ----- Original Message -----
> From: Jackpft@aol.com
> To: oletrucks@autox.team.net
> Subject: [oletrucks] Tools
> Date: Sun, 28 Aug 2005 19:44:47 EDT
>
> >
> > Does anyone know where I can buy a socket for removing the floor board
of a
> > 1955 Chev pick-up? The screws have an "hour glass" shaped slot. I
don't
> > have any idea what it is called. Could not locate anything like it at
any local
> > parts stores.
> >
> > Thanks,
> >
> > Jack
> >
>
>
> Mark Noakes
>
> Personal, hobby, enthusiast vehicles, work/school, nature/travel/art
photography located at:
>
> http://blog.mark.noakes.com/
>
> "In theory there is no difference between theory and practice, but in
practice there is usually a difference."
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|