[oletrucks] welding a van column

["J Forbes" <jforbspam@fastmail.fm>]

> My concern is can I weld to the base of the column  - about 3 " up ( minimal
> heat / water cooled ) without taking the column apart - any plastic inside?

there's the plastic bearing support at the bottom, if you remove that
you should be ok.

Jim
-- 
  J Forbes
  jforbspam@fastmail.fm

-- 
http://www.fastmail.fm - Does exactly what it says on the tin

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959