I am working on replacing the in-cab gas tank in my '56 3100. Thought it
would be a good time to replace the cracked and worn out filler neck grommet.
Upon removing the old one, there is rust damage underneath and now a piece of
the lip has broken off. The damage is about 1/2 inch to the right of the
keyhole (at the bottom) and extends about an inch and a half up. The good
news is that the damage will be concealed underneath the new ruber grommet.
Looking for any suggestions on how to fix this problem.
Thanks in advance,
Kent S Butler
'56 Chevy 3100
Houston, TX
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
Oletrucks@autox.team.net
http://autox.team.net/mailman/listinfo/oletrucks
|