shop-talk
[Top] [All Lists]

[Shop-talk] The air saga continues...

Subject: [Shop-talk] The air saga continues...
From: eric at megageek.com (eric at megageek.com)
Date: Wed, 1 Jun 2011 06:24:49 -0400
OK, here is a new idea I have for dealing with the leaks...

I found an epoxy that is like a thick liquid.  I was thinking to put a 
vacuum in the air lines (not sure of the best way to do that) then pour 
the epoxy on the joints.  This should draw the epoxy into the leaking 
joints and form a better seal.

Anyone have any ideas about that?  What's the best way to get a small 
vacuum on an air line set up?

Moose
"Be as beneficent as the sun or the sea, but if your rights as a rational 
being are trenched on, die on the first inch of your territory." Ralph 
Waldo Emerson 




Mark Andy <marka at maracing.com> 
Sent by: shop-talk-bounces at autox.team.net
05/31/2011 23:24

To
"'shop-talk'" <shop-talk at autox.team.net>
cc

Subject
Re: [Shop-talk] The air saga continues...






Howdy,

On Tue, 31 May 2011, Randall wrote:
>> If it were me, I'd put a valve on the compressor outlet that gets shut 
off
>> when I'm not out there and call it a day.
>
> So what type of remotely operated valve would be appropriate?
>
> I don't know much about solenoid valves, but it appears that the 
> inexpensive "piloted" valves always have a pressure drop across the 
> valve, which may not be ideal.  And "non-pilot" valves seem rather 
> expensive.

I have a regular old 3/4" (?? I think?) ball valve on my compressors 
output.

If the compressor is somewhere you can't easily get to it, that obviously 
isn't going to work.

Mark
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/eric at megageek.com

<Prev in Thread] Current Thread [Next in Thread>