What size light bulb and diode did you use? I have a couple of
batteries that might work on.
On 11/24/2013 5:04 PM, Randall wrote:
>> I know the hard-core battery types laugh at the idea that what these
>> chargers do is really 'desulfating' but it does seem to work,
> FWIW, I just recovered 2 AGM batteries and a 12v gel pack that were badly
> sulfated, using a very simple home-brew "desulfator". I
> honestly did not think it would work, but I'm 3 for 3 and working on the 4th
> as I type.
>
> The "desulfator" is just a single diode (half wave rectifier) and an
> incandescent light bulb, in series. The diode supplies
> essentially 16ms pulses, while the bulb limits the current.
>
> All of the batteries initially went up to around 60 volts (indicating very
> high internal resistance and severe sulfation), then
> after a few days dropped to well below 12v. After 3-4 days, I switched to an
> ordinary unregulated charger for about 10 hours.
>
> Haven't done a real load test yet, but after loading one at about 5 amps for
> about an hour, the voltage was still around 12.8.
>
> Randall
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|