--===============0159408535431468104==
boundary="Apple-Mail=_7FECEE52-536C-411B-9CB7-AEC35592DF2A"
--Apple-Mail=_7FECEE52-536C-411B-9CB7-AEC35592DF2A
Content-Transfer-Encoding: quoted-printable
charset=utf-8
Yes, I=E2=80=99m planning to put all of the things to drain in the same =
area, so hopefully I=E2=80=99ll do that regularly.
-Darrell
> On Aug 11, 2020, at 6:24 PM, DAVID MASSEY <dave1massey@cs.com> wrote:
>=20
> Cool. You'll need to drain the drip leg periodically, it will fill up =
pretty quickly.
>=20
> Dave=20
>=20
>=20
>=20
> -----Original Message-----
> From: Darrell Walker <darrellw360@mac.com>
> To: DAVID MASSEY <dave1massey@cs.com>
> Cc: Shop-talk@autox.team.net <Shop-talk@autox.team.net>
> Sent: Tue, Aug 11, 2020 8:06 pm
> Subject: Re: [Shop-talk] Looking to buy a compressor
>=20
>=20
> I plan to have the output of the radiator exit down, with a tee. =
I=E2=80=99m going to put a drip leg, then take the air out of the side =
of the tee. That will feed into my filter/moisture separator, hopefully =
the liquid will run down into the drip leg.
>=20
> I=E2=80=99ll post pictures and results when I get it all plumbed.
>=20
> -Darrell
>=20
>> On Aug 11, 2020, at 6:00 PM, DAVID MASSEY <dave1massey@cs.com =
>>=20
>> What are your plans for getting rid of the water? Most dryers have =
some sort of drain, either float actuated or a timer/solenoid valve =
set-up. But will the transmission coolers self-drain?
>>=20
>> Dave=20
>>=20
>>=20
>>=20
>> -----Original Message-----
>> From: Darrell Walker <darrellw360@mac.com =
>> Sent: Tue, Aug 11, 2020 7:07 pm
>> Subject: Re: [Shop-talk] Looking to buy a compressor
>>=20
>>=20
>> Yes, the objective is to reduce moisture. I don=E2=80=99t have a lot =
of space for long runs of iron pipe, so I=E2=80=99m looking at using a =
transmission radiator.
>>=20
>> The compressor arrived today (one advantage of getting it from Lowes, =
they had some in stock). And the delivery guys even put it into the =
garage for me (gave them a nice tip since I didn=E2=80=99t have to drag =
it up the driveway).
>>=20
>> My wife=E2=80=99s reaction was similar to what someone else reported, =
=E2=80=9Cthat=E2=80=99s big=E2=80=9D.
>>=20
>> -Darrell
>>=20
>> > On Aug 11, 2020, at 1:20 PM, <alfuller194@gmail.com =
>> >=20
>> > What are you trying to accomplish with the aftercooler?
>> >=20
>> > If it is to get water/vapor out of the compressed air, consider =
using iron pipe for distribution. The pipe should cool down the water =
vaper and allow it to condense and flow to a low point for removal.
>> >=20
>> > ----------------
>> > All the best,
>> >=20
>> > Al Fuller
>> >=20
>> > -----Original Message-----
>> > From: Shop-talk <shop-talk-bounces@autox.team.net =
>> > Sent: Monday, August 10, 2020 8:14 PM
>> > Subject: Re: [Shop-talk] Looking to buy a compressor
>> >=20
>> >=20
>> > I thought I=E2=80=99d update you all on my compressor search. I =
purchased the Kobalt 60 gallon, two-stage from Lowe=E2=80=99s. It =
mostly came down to the weight of the Quincy unit, not sure I could =
handle a nearly 500 lb compressor, and getting anyone to help is =
problematic.
>> >=20
>> > Now I=E2=80=99m researching after-coolers. I=E2=80=99ve found =
several ideal using a transmission cooler. I understand that putting it =
between the compressor and the tank is most effective, but I=E2=80=99m a =
little hesitant to start re-plumbing my brand new compressor. So I may =
install it on the outflow. I=E2=80=99ve seen other designs using a =
series of pipe loops, but space is a bit of concern, so the transmission =
cooler with a fan to cool is more inline with what I can install.
>> >=20
>> > Any thoughts or experience on aftercoolers would be appreciated!
>> >=20
>> > Thanks,
>> > Darrell
>> >=20
>> >=20
>> > _______________________________________________
>> >=20
>> > Donate: http://www.team.net/donate.html =
<http://www.team.net/donate.html>
>> > Suggested annual donation $12.96
>> > Archive: http://www.team.net/pipermail/shop-talk =
<http://www.team.net/pipermail/shop-talk>http://autox.team.net/archive =
<http://autox.team.net/archive>
>> >=20
>> > Unsubscribe/Manage: =
http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.com =
<http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.com>
>> >=20
>> >=20
>>=20
>> _______________________________________________
>>=20
>> Donate: http://www.team.net/donate.html =
<http://www.team.net/donate.html>
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/pipermail/shop-talk =
<http://www.team.net/pipermail/shop-talk>http://autox.team.net/archive =
<http://autox.team.net/archive>
>>=20
>> Unsubscribe/Manage: =
http://autox.team.net/mailman/options/shop-talk/dave1massey@cs.com =
<http://autox.team.net/mailman/options/shop-talk/dave1massey@cs.com>
>>=20
>=20
--Apple-Mail=_7FECEE52-536C-411B-9CB7-AEC35592DF2A
Content-Transfer-Encoding: quoted-printable
charset=utf-8
<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; =
charset=3Dutf-8"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; line-break: after-white-space;" class=3D""><div =
class=3D""><br class=3D""></div>Yes, I=E2=80=99m planning to put all of =
the things to drain in the same area, so hopefully I=E2=80=99ll do that =
regularly.<div class=3D""><br class=3D""></div><div class=3D"">-Darrell<br=
class=3D""><div><br class=3D""><blockquote type=3D"cite" class=3D""><div =
class=3D"">On Aug 11, 2020, at 6:24 PM, DAVID MASSEY <<a =
href=3D"mailto:dave1massey@cs.com"; class=3D"">dave1massey@cs.com</a>> =
wrote:</div><br class=3D"Apple-interchange-newline"><div class=3D"">
<div style=3D"font-style: normal; font-variant-caps: normal; =
font-weight: normal; font-stretch: normal; font-size: 12pt; line-height: =
normal; font-family: Arial, Helvetica, sans-serif;" class=3D"">
<div class=3D""> <font size=3D"3" class=3D"">Cool. You'll need to =
drain the drip leg periodically, it will fill up pretty =
quickly.</font><br class=3D"">
</div>
<div class=3D""> <br class=3D"">
</div>
<div style=3D"clear:both" class=3D""><font size=3D"4" class=3D"">Dave =
</font><br class=3D"">
<br class=3D"">
</div>
<div class=3D""> <br class=3D"">
</div>
<div class=3D""> <br class=3D"">
</div>
<div style=3D"font-family: arial, helvetica; font-size: 10pt;" =
class=3D"">-----Original Message-----<br class=3D"">
From: Darrell Walker <<a href=3D"mailto:darrellw360@mac.com"; =
class=3D"">darrellw360@mac.com</a>><br class=3D"">
To: DAVID MASSEY <<a href=3D"mailto:dave1massey@cs.com"; =
class=3D"">dave1massey@cs.com</a>><br class=3D"">
Cc: <a href=3D"mailto:Shop-talk@autox.team.net"; =
class=3D"">Shop-talk@autox.team.net</a> <<a =
href=3D"mailto:Shop-talk@autox.team.net"; =
class=3D"">Shop-talk@autox.team.net</a>><br class=3D"">
Sent: Tue, Aug 11, 2020 8:06 pm<br class=3D"">
Subject: Re: [Shop-talk] Looking to buy a compressor<br class=3D"">
<br class=3D"">
<div id=3D"yiv2268253414" class=3D"">
<div class=3D"">
<div class=3D"yiv2268253414"><br class=3D"yiv2268253414" =
clear=3D"none"></div>
I plan to have the output of the radiator exit down, with a tee. =
I=E2=80=99m going to put a drip leg, then take the air out of the =
side of the tee. That will feed into my filter/moisture separator, =
hopefully the liquid will run down into the drip leg.
<div class=3D"yiv2268253414"><br class=3D"yiv2268253414" =
clear=3D"none"></div>
<div class=3D"yiv2268253414">I=E2=80=99ll post pictures and results when =
I get it all plumbed.</div>
<div class=3D"yiv2268253414"><br class=3D"yiv2268253414" =
clear=3D"none"></div>
<div class=3D"yiv2268253414">-Darrell<br class=3D"yiv2268253414" =
clear=3D"none">
<div class=3D"yiv2268253414yqt4516896867" id=3D"yiv2268253414yqt91439">
<div class=3D""><br class=3D"yiv2268253414" clear=3D"none"><blockquote =
class=3D"yiv2268253414" type=3D"cite">
<div class=3D"yiv2268253414">On Aug 11, 2020, at 6:00 PM, DAVID MASSEY =
<<a rel=3D"nofollow" shape=3D"rect" class=3D"yiv2268253414" =
ymailto=3D"mailto:dave1massey@cs.com"; target=3D"_blank" =
href=3D"mailto:dave1massey@cs.com";>dave1massey@cs.com</a>> =
wrote:</div>
<br class=3D"yiv2268253414Apple-interchange-newline" clear=3D"none">
<div class=3D"yiv2268253414">
<div class=3D"yiv2268253414" =
style=3D"font-style:normal;font-weight:normal;font-stretch:normal;font-siz=
e:12pt;line-height:normal;font-family:Arial, Helvetica, sans-serif;">
<div class=3D"yiv2268253414"> <font class=3D"yiv2268253414" =
size=3D"3">What are your plans for getting rid of the water? Most =
dryers have some sort of drain, either float actuated or a =
timer/solenoid valve set-up. But will the transmission coolers =
self-drain?</font><br class=3D"yiv2268253414" clear=3D"none">
</div>
<div class=3D"yiv2268253414"> <br class=3D"yiv2268253414" clear=3D"none">
</div>
<div class=3D"yiv2268253414" style=3D"clear:both;"><font =
class=3D"yiv2268253414" size=3D"4">Dave </font><br class=3D"yiv2268253414"=
clear=3D"none">
<br class=3D"yiv2268253414" clear=3D"none">
</div>
<div class=3D"yiv2268253414"> <br class=3D"yiv2268253414" clear=3D"none">
</div>
<div class=3D"yiv2268253414"> <br class=3D"yiv2268253414" clear=3D"none">
</div>
<div class=3D"yiv2268253414" style=3D"font-family:arial, =
helvetica;font-size:10pt;">-----Original Message-----<br =
class=3D"yiv2268253414" clear=3D"none">
From: Darrell Walker <<a rel=3D"nofollow" shape=3D"rect" =
class=3D"yiv2268253414" ymailto=3D"mailto:darrellw360@mac.com"; =
target=3D"_blank" =
href=3D"mailto:darrellw360@mac.com";>darrellw360@mac.com</a>><br =
class=3D"yiv2268253414" clear=3D"none">
To: <a rel=3D"nofollow" shape=3D"rect" class=3D"yiv2268253414" =
ymailto=3D"mailto:Shop-talk@autox.team.net"; target=3D"_blank" =
href=3D"mailto:Shop-talk@autox.team.net";>Shop-talk@autox.team.net</a><br =
class=3D"yiv2268253414" clear=3D"none">
Sent: Tue, Aug 11, 2020 7:07 pm<br class=3D"yiv2268253414" clear=3D"none">=
Subject: Re: [Shop-talk] Looking to buy a compressor<br =
class=3D"yiv2268253414" clear=3D"none">
<br class=3D"yiv2268253414" clear=3D"none">
<div class=3D"yiv2268253414" dir=3D"ltr"><br class=3D"yiv2268253414" =
clear=3D"none">Yes, the objective is to reduce moisture. I don=E2=80=
=99t have a lot of space for long runs of iron pipe, so I=E2=80=99m =
looking at using a transmission radiator.<br class=3D"yiv2268253414" =
clear=3D"none"><br class=3D"yiv2268253414" clear=3D"none">The compressor =
arrived today (one advantage of getting it from Lowes, they had some in =
stock). And the delivery guys even put it into the garage for me =
(gave them a nice tip since I didn=E2=80=99t have to drag it up the =
driveway).<br class=3D"yiv2268253414" clear=3D"none"><br =
class=3D"yiv2268253414" clear=3D"none">My wife=E2=80=99s reaction was =
similar to what someone else reported, =E2=80=9Cthat=E2=80=99s =
big=E2=80=9D.<br class=3D"yiv2268253414" clear=3D"none"><br =
class=3D"yiv2268253414" clear=3D"none">-Darrell<br class=3D"yiv2268253414"=
clear=3D"none">
<div class=3D"yiv2268253414yqt5563679320" =
id=3D"yiv2268253414yqtfd43043"><br class=3D"yiv2268253414" =
clear=3D"none">> On Aug 11, 2020, at 1:20 PM, <<a rel=3D"nofollow" =
shape=3D"rect" class=3D"yiv2268253414" =
ymailto=3D"mailto:alfuller194@gmail.com"; target=3D"_blank" =
href=3D"mailto:alfuller194@gmail.com";>alfuller194@gmail.com</a>> =
<<a rel=3D"nofollow" shape=3D"rect" class=3D"yiv2268253414" =
ymailto=3D"mailto:alfuller194@gmail.com"; target=3D"_blank" =
href=3D"mailto:alfuller194@gmail.com";>alfuller194@gmail.com</a>> =
wrote:<br class=3D"yiv2268253414" clear=3D"none">> <br =
class=3D"yiv2268253414" clear=3D"none">> What are you trying to =
accomplish with the aftercooler?<br class=3D"yiv2268253414" =
clear=3D"none">> <br class=3D"yiv2268253414" clear=3D"none">> If =
it is to get water/vapor out of the compressed air, consider using iron =
pipe for distribution. The pipe should cool down the water vaper and =
allow it to condense and flow to a low point for removal.<br =
class=3D"yiv2268253414" clear=3D"none">> <br class=3D"yiv2268253414" =
clear=3D"none">> ----------------<br class=3D"yiv2268253414" =
clear=3D"none">> All the best,<br class=3D"yiv2268253414" =
clear=3D"none">> <br class=3D"yiv2268253414" clear=3D"none">> Al =
Fuller<br class=3D"yiv2268253414" clear=3D"none">> <br =
class=3D"yiv2268253414" clear=3D"none">> -----Original =
Message-----<br class=3D"yiv2268253414" clear=3D"none">> From: =
Shop-talk <<a rel=3D"nofollow" shape=3D"rect" class=3D"yiv2268253414" =
ymailto=3D"mailto:shop-talk-bounces@autox.team.net"; target=3D"_blank" =
href=3D"mailto:shop-talk-bounces@autox.team.net";>shop-talk-bounces@autox.t=
eam.net</a>> On Behalf Of Darrell Walker<br class=3D"yiv2268253414" =
clear=3D"none">> Sent: Monday, August 10, 2020 8:14 PM<br =
class=3D"yiv2268253414" clear=3D"none">> To: <a rel=3D"nofollow" =
shape=3D"rect" class=3D"yiv2268253414" =
ymailto=3D"mailto:Shop-talk@autox.team.net"; target=3D"_blank" =
href=3D"mailto:Shop-talk@autox.team.net";>Shop-talk@autox.team.net</a><br =
class=3D"yiv2268253414" clear=3D"none">> Subject: Re: [Shop-talk] =
Looking to buy a compressor<br class=3D"yiv2268253414" clear=3D"none">>=
<br class=3D"yiv2268253414" clear=3D"none">> <br =
class=3D"yiv2268253414" clear=3D"none">> I thought I=E2=80=99d update =
you all on my compressor search. I purchased the Kobalt 60 gallon, =
two-stage from Lowe=E2=80=99s. It mostly came down to the weight =
of the Quincy unit, not sure I could handle a nearly 500 lb compressor, =
and getting anyone to help is problematic.<br class=3D"yiv2268253414" =
clear=3D"none">> <br class=3D"yiv2268253414" clear=3D"none">> Now =
I=E2=80=99m researching after-coolers. I=E2=80=99ve found several =
ideal using a transmission cooler. I understand that putting it =
between the compressor and the tank is most effective, but I=E2=80=99m a =
little hesitant to start re-plumbing my brand new compressor. So I =
may install it on the outflow. I=E2=80=99ve seen other designs =
using a series of pipe loops, but space is a bit of concern, so the =
transmission cooler with a fan to cool is more inline with what I can =
install.<br class=3D"yiv2268253414" clear=3D"none">> <br =
class=3D"yiv2268253414" clear=3D"none">> Any thoughts or experience =
on aftercoolers would be appreciated!<br class=3D"yiv2268253414" =
clear=3D"none">> <br class=3D"yiv2268253414" clear=3D"none">> =
Thanks,<br class=3D"yiv2268253414" clear=3D"none">> Darrell<br =
class=3D"yiv2268253414" clear=3D"none">> <br class=3D"yiv2268253414" =
clear=3D"none">> <br class=3D"yiv2268253414" clear=3D"none">> =
_______________________________________________<br class=3D"yiv2268253414"=
clear=3D"none">> <br class=3D"yiv2268253414" clear=3D"none">> <a =
rel=3D"nofollow" shape=3D"rect" class=3D"yiv2268253414" =
ymailto=3D"mailto:Shop-talk@autox.team.net"; target=3D"_blank" =
href=3D"mailto:Shop-talk@autox.team.net";>Shop-talk@autox.team.net</a><br =
class=3D"yiv2268253414" clear=3D"none">> Donate: <a rel=3D"nofollow" =
shape=3D"rect" class=3D"yiv2268253414" target=3D"_blank" =
href=3D"http://www.team.net/donate.html";>http://www.team.net/donate.html</=
a><br class=3D"yiv2268253414" clear=3D"none">> Suggested annual =
donation $12.96<br class=3D"yiv2268253414" clear=3D"none">> =
Archive: <a rel=3D"nofollow" shape=3D"rect" class=3D"yiv2268253414" =
target=3D"_blank" =
href=3D"http://www.team.net/pipermail/shop-talk";>http://www.team.net/piper=
mail/shop-talk </a><a rel=3D"nofollow" shape=3D"rect" =
class=3D"yiv2268253414" target=3D"_blank" =
href=3D"http://autox.team.net/archive";>http://autox.team.net/archive</a><b=
r class=3D"yiv2268253414" clear=3D"none">> <br class=3D"yiv2268253414" =
clear=3D"none">> Unsubscribe/Manage: <a rel=3D"nofollow" shape=3D"rect"=
class=3D"yiv2268253414" target=3D"_blank" =
href=3D"http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.=
com">http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.com=
</a><br class=3D"yiv2268253414" clear=3D"none">> <br =
class=3D"yiv2268253414" clear=3D"none">> <br class=3D"yiv2268253414" =
clear=3D"none"><br class=3D"yiv2268253414" =
clear=3D"none">_______________________________________________<br =
class=3D"yiv2268253414" clear=3D"none"><br class=3D"yiv2268253414" =
clear=3D"none"><a rel=3D"nofollow" shape=3D"rect" class=3D"yiv2268253414" =
ymailto=3D"mailto:Shop-talk@autox.team.net"; target=3D"_blank" =
href=3D"mailto:Shop-talk@autox.team.net";>Shop-talk@autox.team.net</a><br =
class=3D"yiv2268253414" clear=3D"none">Donate: <a rel=3D"nofollow" =
shape=3D"rect" class=3D"yiv2268253414" target=3D"_blank" =
href=3D"http://www.team.net/donate.html";>http://www.team.net/donate.html</=
a><br class=3D"yiv2268253414" clear=3D"none">Suggested annual =
donation $12.96<br class=3D"yiv2268253414" clear=3D"none">Archive: =
<a rel=3D"nofollow" shape=3D"rect" class=3D"yiv2268253414" =
target=3D"_blank" =
href=3D"http://www.team.net/pipermail/shop-talk";>http://www.team.net/piper=
mail/shop-talk </a><a rel=3D"nofollow" shape=3D"rect" =
class=3D"yiv2268253414" target=3D"_blank" =
href=3D"http://autox.team.net/archive";>http://autox.team.net/archive</a><b=
r class=3D"yiv2268253414" clear=3D"none"><br class=3D"yiv2268253414" =
clear=3D"none">Unsubscribe/Manage: <a rel=3D"nofollow" shape=3D"rect" =
class=3D"yiv2268253414" target=3D"_blank" =
href=3D"http://autox.team.net/mailman/options/shop-talk/dave1massey@cs.com=
">http://autox.team.net/mailman/options/shop-talk/dave1massey@cs.com</a><b=
r class=3D"yiv2268253414" clear=3D"none"><br class=3D"yiv2268253414" =
clear=3D"none"></div>
</div>
</div>
</div>
</div>
</blockquote></div>
</div>
<br class=3D"yiv2268253414" clear=3D"none"></div>
</div>
</div>
</div>
</div>
</div></blockquote></div><br class=3D""></div></body></html>=
--Apple-Mail=_7FECEE52-536C-411B-9CB7-AEC35592DF2A--
--===============0159408535431468104==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
--===============0159408535431468104==--
|