--===============2186599389575598143==
Content-Language: en-US
boundary="_000_MW2PR07MB3978706F52305064B7C1B50DBB420MW2PR07MB3978namp_"
--_000_MW2PR07MB3978706F52305064B7C1B50DBB420MW2PR07MB3978namp_
Content-Transfer-Encoding: quoted-printable
I don't know if you use one of the automatic drains, but if you do and your=
transmission cooler is near the compressor, you could plumb the drip leg a=
nd the compressor tank drain together and the automatic drain would take ca=
re of them both.
Brian
Nampa, ID
________________________________
From: Shop-talk <shop-talk-bounces@autox.team.net> on behalf of Darrell Wal=
ker <darrellw360@mac.com>
Sent: Tuesday, August 11, 2020 8:12 PM
To: DAVID MASSEY <dave1massey@cs.com>
Cc: Shop-talk@autox.team.net <Shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Looking to buy a compressor
Yes, I=92m planning to put all of the things to drain in the same area, so =
hopefully I=92ll do that regularly.
-Darrell
assey@cs.com>> wrote:
Cool. You'll need to drain the drip leg periodically, it will fill up pret=
ty quickly.
Dave
-----Original Message-----
Sent: Tue, Aug 11, 2020 8:06 pm
Subject: Re: [Shop-talk] Looking to buy a compressor
I plan to have the output of the radiator exit down, with a tee. I=92m goi=
ng to put a drip leg, then take the air out of the side of the tee. That w=
ill feed into my filter/moisture separator, hopefully the liquid will run d=
own into the drip leg.
I=92ll post pictures and results when I get it all plumbed.
-Darrell
assey@cs.com>> wrote:
What are your plans for getting rid of the water? Most dryers have some so=
rt of drain, either float actuated or a timer/solenoid valve set-up. But w=
ill the transmission coolers self-drain?
Dave
-----Original Message-----
Sent: Tue, Aug 11, 2020 7:07 pm
Subject: Re: [Shop-talk] Looking to buy a compressor
Yes, the objective is to reduce moisture. I don=92t have a lot of space fo=
r long runs of iron pipe, so I=92m looking at using a transmission radiator=
.
The compressor arrived today (one advantage of getting it from Lowes, they =
had some in stock). And the delivery guys even put it into the garage for =
me (gave them a nice tip since I didn=92t have to drag it up the driveway).
My wife=92s reaction was similar to what someone else reported, =93that=92s=
big=94.
-Darrell
>
> What are you trying to accomplish with the aftercooler?
>
> If it is to get water/vapor out of the compressed air, consider using iro=
n pipe for distribution. The pipe should cool down the water vaper and allo=
w it to condense and flow to a low point for removal.
>
> ----------------
> All the best,
>
> Al Fuller
>
> -----Original Message-----
s@autox.team.net>> On Behalf Of Darrell Walker
> Sent: Monday, August 10, 2020 8:14 PM
> Subject: Re: [Shop-talk] Looking to buy a compressor
>
>
> I thought I=92d update you all on my compressor search. I purchased the =
Kobalt 60 gallon, two-stage from Lowe=92s. It mostly came down to the weig=
ht of the Quincy unit, not sure I could handle a nearly 500 lb compressor, =
and getting anyone to help is problematic.
>
> Now I=92m researching after-coolers. I=92ve found several ideal using a =
transmission cooler. I understand that putting it between the compressor a=
nd the tank is most effective, but I=92m a little hesitant to start re-plum=
bing my brand new compressor. So I may install it on the outflow. I=92ve =
seen other designs using a series of pipe loops, but space is a bit of conc=
ern, so the transmission cooler with a fan to cool is more inline with what=
I can install.
>
> Any thoughts or experience on aftercoolers would be appreciated!
>
> Thanks,
> Darrell
>
>
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/ar=
chive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/alful=
ler194@gmail.com
>
>
_______________________________________________
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/arch=
ive
ssey@cs.com
--_000_MW2PR07MB3978706F52305064B7C1B50DBB420MW2PR07MB3978namp_
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
252">
<style type=3D"text/css" style=3D"display:none;"> P {margin-top:0;margin-bo=
ttom:0;} </style>
</head>
<body dir=3D"ltr">
<div style=3D"font-family: Calibri, Helvetica, sans-serif; font-size: 12pt;=
color: rgb(0, 0, 0);">
I don't know if you use one of the automatic drains, but if you do and your=
transmission cooler is near the compressor, you could plumb the drip leg a=
nd the compressor tank drain together and the automatic drain would take ca=
re of them both.</div>
<div style=3D"font-family: Calibri, Helvetica, sans-serif; font-size: 12pt;=
color: rgb(0, 0, 0);">
<br>
</div>
<div style=3D"font-family: Calibri, Helvetica, sans-serif; font-size: 12pt;=
color: rgb(0, 0, 0);">
Brian</div>
<div style=3D"font-family: Calibri, Helvetica, sans-serif; font-size: 12pt;=
color: rgb(0, 0, 0);">
Nampa, ID</div>
<div>
<div id=3D"appendonsend"></div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif; font-size:12pt; col=
or:rgb(0,0,0)">
<br>
</div>
<hr tabindex=3D"-1" style=3D"display:inline-block; width:98%">
<div id=3D"divRplyFwdMsg" dir=3D"ltr"><font face=3D"Calibri, sans-serif" co=
lor=3D"#000000" style=3D"font-size:11pt"><b>From:</b> Shop-talk <shop-ta=
lk-bounces@autox.team.net> on behalf of Darrell Walker <darrellw360@m=
ac.com><br>
<b>Sent:</b> Tuesday, August 11, 2020 8:12 PM<br>
<b>To:</b> DAVID MASSEY <dave1massey@cs.com><br>
<b>Cc:</b> Shop-talk@autox.team.net <Shop-talk@autox.team.net><br>
<b>Subject:</b> Re: [Shop-talk] Looking to buy a compressor</font>
<div> </div>
</div>
<div class=3D"" style=3D"word-wrap:break-word; line-break:after-white-space=
">
<div class=3D""><br class=3D"">
</div>
Yes, I=92m planning to put all of the things to drain in the same area, so =
hopefully I=92ll do that regularly.
<div class=3D""><br class=3D"">
</div>
<div class=3D"">-Darrell<br class=3D"">
<div><br class=3D"">
<blockquote type=3D"cite" class=3D"">
<div class=3D"">On Aug 11, 2020, at 6:24 PM, DAVID MASSEY <<a href=3D"ma=
ilto:dave1massey@cs.com" class=3D"">dave1massey@cs.com</a>> wrote:</div>
<br class=3D"x_Apple-interchange-newline">
<div class=3D"">
<div class=3D"" style=3D"font-style:normal; font-variant-caps:normal; font-=
weight:normal; font-stretch:normal; font-size:12pt; line-height:normal; fon=
t-family:Arial,Helvetica,sans-serif">
<div class=3D""><font size=3D"3" class=3D"">Cool. You'll need to drai=
n the drip leg periodically, it will fill up pretty quickly.</font><br clas=
s=3D"">
</div>
<div class=3D""><br class=3D"">
</div>
<div class=3D"" style=3D"clear:both"><font size=3D"4" class=3D"">Dave </fon=
t><br class=3D"">
<br class=3D"">
</div>
<div class=3D""><br class=3D"">
</div>
<div class=3D""><br class=3D"">
</div>
<div class=3D"" style=3D"font-family:arial,helvetica; font-size:10pt">-----=
Original Message-----<br class=3D"">
From: Darrell Walker <<a href=3D"mailto:darrellw360@mac.com"; class=3D"">=
darrellw360@mac.com</a>><br class=3D"">
To: DAVID MASSEY <<a href=3D"mailto:dave1massey@cs.com"; class=3D"">dave1=
massey@cs.com</a>><br class=3D"">
Cc: <a href=3D"mailto:Shop-talk@autox.team.net"; class=3D"">Shop-talk@autox.=
team.net</a> <<a href=3D"mailto:Shop-talk@autox.team.net"; class=3D"">Sho=
p-talk@autox.team.net</a>><br class=3D"">
Sent: Tue, Aug 11, 2020 8:06 pm<br class=3D"">
Subject: Re: [Shop-talk] Looking to buy a compressor<br class=3D"">
<br class=3D"">
<div id=3D"x_yiv2268253414" class=3D"">
<div class=3D"">
<div class=3D"x_yiv2268253414"><br class=3D"x_yiv2268253414" clear=3D"none"=
>
</div>
I plan to have the output of the radiator exit down, with a tee. I=92=
m going to put a drip leg, then take the air out of the side of the tee. &n=
bsp;That will feed into my filter/moisture separator, hopefully the liquid =
will run down into the drip leg.
<div class=3D"x_yiv2268253414"><br class=3D"x_yiv2268253414" clear=3D"none"=
>
</div>
<div class=3D"x_yiv2268253414">I=92ll post pictures and results when I get =
it all plumbed.</div>
<div class=3D"x_yiv2268253414"><br class=3D"x_yiv2268253414" clear=3D"none"=
>
</div>
<div class=3D"x_yiv2268253414">-Darrell<br class=3D"x_yiv2268253414" clear=
=3D"none">
<div class=3D"x_yiv2268253414yqt4516896867" id=3D"x_yiv2268253414yqt91439">
<div class=3D""><br class=3D"x_yiv2268253414" clear=3D"none">
<blockquote class=3D"x_yiv2268253414" type=3D"cite">
<div class=3D"x_yiv2268253414">On Aug 11, 2020, at 6:00 PM, DAVID MASSEY &l=
t;<a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2268253414" target=3D"_b=
lank" href=3D"mailto:dave1massey@cs.com";>dave1massey@cs.com</a>> wrote:<=
/div>
<br class=3D"x_yiv2268253414Apple-interchange-newline" clear=3D"none">
<div class=3D"x_yiv2268253414">
<div class=3D"x_yiv2268253414" style=3D"font-style:normal; font-weight:norm=
al; font-stretch:normal; font-size:12pt; line-height:normal; font-family:Ar=
ial,Helvetica,sans-serif">
<div class=3D"x_yiv2268253414"><font class=3D"x_yiv2268253414" size=3D"3">W=
hat are your plans for getting rid of the water? Most dryers have som=
e sort of drain, either float actuated or a timer/solenoid valve set-up.&nb=
sp; But will the transmission coolers self-drain?</font><br class=3D"x_yiv2=
268253414" clear=3D"none">
</div>
<div class=3D"x_yiv2268253414"><br class=3D"x_yiv2268253414" clear=3D"none"=
>
</div>
<div class=3D"x_yiv2268253414" style=3D"clear:both"><font class=3D"x_yiv226=
8253414" size=3D"4">Dave
</font><br class=3D"x_yiv2268253414" clear=3D"none">
<br class=3D"x_yiv2268253414" clear=3D"none">
</div>
<div class=3D"x_yiv2268253414"><br class=3D"x_yiv2268253414" clear=3D"none"=
>
</div>
<div class=3D"x_yiv2268253414"><br class=3D"x_yiv2268253414" clear=3D"none"=
>
</div>
<div class=3D"x_yiv2268253414" style=3D"font-family:arial,helvetica; font-s=
ize:10pt">
-----Original Message-----<br class=3D"x_yiv2268253414" clear=3D"none">
From: Darrell Walker <<a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2=
268253414" target=3D"_blank" href=3D"mailto:darrellw360@mac.com";>darrellw36=
0@mac.com</a>><br class=3D"x_yiv2268253414" clear=3D"none">
To: <a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2268253414" target=3D"=
_blank" href=3D"mailto:Shop-talk@autox.team.net";>
Shop-talk@autox.team.net</a><br class=3D"x_yiv2268253414" clear=3D"none">
Sent: Tue, Aug 11, 2020 7:07 pm<br class=3D"x_yiv2268253414" clear=3D"none"=
>
Subject: Re: [Shop-talk] Looking to buy a compressor<br class=3D"x_yiv22682=
53414" clear=3D"none">
<br class=3D"x_yiv2268253414" clear=3D"none">
<div class=3D"x_yiv2268253414" dir=3D"ltr"><br class=3D"x_yiv2268253414" cl=
ear=3D"none">
Yes, the objective is to reduce moisture. I don=92t have a lot of spa=
ce for long runs of iron pipe, so I=92m looking at using a transmission rad=
iator.<br class=3D"x_yiv2268253414" clear=3D"none">
<br class=3D"x_yiv2268253414" clear=3D"none">
The compressor arrived today (one advantage of getting it from Lowes, they =
had some in stock). And the delivery guys even put it into the garage=
for me (gave them a nice tip since I didn=92t have to drag it up the drive=
way).<br class=3D"x_yiv2268253414" clear=3D"none">
<br class=3D"x_yiv2268253414" clear=3D"none">
My wife=92s reaction was similar to what someone else reported, =93that=92s=
big=94.<br class=3D"x_yiv2268253414" clear=3D"none">
<br class=3D"x_yiv2268253414" clear=3D"none">
-Darrell<br class=3D"x_yiv2268253414" clear=3D"none">
<div class=3D"x_yiv2268253414yqt5563679320" id=3D"x_yiv2268253414yqtfd43043=
"><br class=3D"x_yiv2268253414" clear=3D"none">
> On Aug 11, 2020, at 1:20 PM, <<a rel=3D"nofollow" shape=3D"rect" cl=
ass=3D"x_yiv2268253414" target=3D"_blank" href=3D"mailto:alfuller194@gmail.=
com">alfuller194@gmail.com</a>> <<a rel=3D"nofollow" shape=3D"rect" c=
lass=3D"x_yiv2268253414" target=3D"_blank" href=3D"mailto:alfuller194@gmail=
.com">alfuller194@gmail.com</a>>
wrote:<br class=3D"x_yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> What are you trying to accomplish with the aftercooler?<br class=3D"x_=
yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> If it is to get water/vapor out of the compressed air, consider using =
iron pipe for distribution. The pipe should cool down the water vaper and a=
llow it to condense and flow to a low point for removal.<br class=3D"x_yiv2=
268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> ----------------<br class=3D"x_yiv2268253414" clear=3D"none">
> All the best,<br class=3D"x_yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> Al Fuller<br class=3D"x_yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> -----Original Message-----<br class=3D"x_yiv2268253414" clear=3D"none"=
>
> From: Shop-talk <<a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2=
268253414" target=3D"_blank" href=3D"mailto:shop-talk-bounces@autox.team.ne=
t">shop-talk-bounces@autox.team.net</a>> On Behalf Of Darrell Walker<br =
class=3D"x_yiv2268253414" clear=3D"none">
> Sent: Monday, August 10, 2020 8:14 PM<br class=3D"x_yiv2268253414" cle=
ar=3D"none">
> To: <a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2268253414" targe=
t=3D"_blank" href=3D"mailto:Shop-talk@autox.team.net";>
Shop-talk@autox.team.net</a><br class=3D"x_yiv2268253414" clear=3D"none">
> Subject: Re: [Shop-talk] Looking to buy a compressor<br class=3D"x_yiv=
2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> I thought I=92d update you all on my compressor search. I purcha=
sed the Kobalt 60 gallon, two-stage from Lowe=92s. It mostly came dow=
n to the weight of the Quincy unit, not sure I could handle a nearly 500 lb=
compressor, and getting anyone to help is problematic.<br class=3D"x_yiv22=
68253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> Now I=92m researching after-coolers. I=92ve found several ideal =
using a transmission cooler. I understand that putting it between the=
compressor and the tank is most effective, but I=92m a little hesitant to =
start re-plumbing my brand new compressor. So I may
install it on the outflow. I=92ve seen other designs using a series =
of pipe loops, but space is a bit of concern, so the transmission cooler wi=
th a fan to cool is more inline with what I can install.<br class=3D"x_yiv2=
268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> Any thoughts or experience on aftercoolers would be appreciated!<br cl=
ass=3D"x_yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> Thanks,<br class=3D"x_yiv2268253414" clear=3D"none">
> Darrell<br class=3D"x_yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> _______________________________________________<br class=3D"x_yiv22682=
53414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> <a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2268253414" target=3D=
"_blank" href=3D"mailto:Shop-talk@autox.team.net";>
Shop-talk@autox.team.net</a><br class=3D"x_yiv2268253414" clear=3D"none">
> Donate: <a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2268253414" t=
arget=3D"_blank" href=3D"http://www.team.net/donate.html";>
one">
> Suggested annual donation $12.96<br class=3D"x_yiv2268253414" cl=
ear=3D"none">
> Archive: <a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2268253414" =
target=3D"_blank" href=3D"http://www.team.net/pipermail/shop-talk";>
http://www.team.net/pipermail/shop-talk </a><a rel=3D"nofollow" shape=3D"re=
ct" class=3D"x_yiv2268253414" target=3D"_blank" href=3D"http://autox.team.n=
et/archive">http://autox.team.net/archive</a><br class=3D"x_yiv2268253414" =
clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> Unsubscribe/Manage: <a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2=
268253414" target=3D"_blank" href=3D"http://autox.team.net/mailman/options/=
shop-talk/alfuller194@gmail.com">
http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.com</a><b=
r class=3D"x_yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
> <br class=3D"x_yiv2268253414" clear=3D"none">
<br class=3D"x_yiv2268253414" clear=3D"none">
_______________________________________________<br class=3D"x_yiv2268253414=
" clear=3D"none">
<br class=3D"x_yiv2268253414" clear=3D"none">
<a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2268253414" target=3D"_bla=
nk" href=3D"mailto:Shop-talk@autox.team.net";>Shop-talk@autox.team.net</a><b=
r class=3D"x_yiv2268253414" clear=3D"none">
=3D"_blank" href=3D"http://www.team.net/donate.html";>
one">
=3D"none">
Archive: <a rel=3D"nofollow" shape=3D"rect" class=3D"x_yiv2268253414" targe=
t=3D"_blank" href=3D"http://www.team.net/pipermail/shop-talk";>
http://www.team.net/pipermail/shop-talk </a><a rel=3D"nofollow" shape=3D"re=
ct" class=3D"x_yiv2268253414" target=3D"_blank" href=3D"http://autox.team.n=
et/archive">http://autox.team.net/archive</a><br class=3D"x_yiv2268253414" =
clear=3D"none">
<br class=3D"x_yiv2268253414" clear=3D"none">
3414" target=3D"_blank" href=3D"http://autox.team.net/mailman/options/shop-=
talk/dave1massey@cs.com">
http://autox.team.net/mailman/options/shop-talk/dave1massey@cs.com</a><br c=
lass=3D"x_yiv2268253414" clear=3D"none">
<br class=3D"x_yiv2268253414" clear=3D"none">
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
<br class=3D"x_yiv2268253414" clear=3D"none">
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
<br class=3D"">
</div>
</div>
</div>
</body>
</html>
--_000_MW2PR07MB3978706F52305064B7C1B50DBB420MW2PR07MB3978namp_--
--===============2186599389575598143==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
--===============2186599389575598143==--
|