Thanks guys! I traced my non-functioning indicators to the hazard light
switch knob being too tight of all things. I found that if I unscrewed the
knob a turn or so, everything works fine. I don't know how permanent a
solution this will be, but it's working for now - got to get him inspected
quick! ;-) Indicating left is still a bit flaky, once in a while it will
blink dimly for a while (wiggling the wires to the column switch cures it)
- I am going to go through the connections tomorrow with cleaner and
contact enhancer.
Thanks again!
Kevin Rhodes
Freddy the Spitfire
|