1 13/16 is correct.
They come in 4/4" drive.
You can get an adapter to size it down to 1/2"
You sure will need an impact wrench, if you borrow someone's sockets
make sure you know where to purchase a new one if your impact breaks the
socket...
I speak from experience. !
-----Original Message-----
From: Peter Cebalo [mailto:cebalo@NthShore.govt.nz]
Sent: Tuesday, March 16, 1999 4:18 AM
To: 'larry hooven'
Cc: 'Spit List'
Subject: RE: BFS needed....
1 13/16", I believe. Never seen one in 1/2" before. Try using a big -
about 14" adjustable wrench.
Peter Cebalo
73 Spitfire
Auckland New Zealand
>----------
>From: larry hooven[SMTP:dirty_howi@yahoo.com]
>Sent: Tuesday, 16 March 1999 22:57
>To: spitfire list
>Subject: BFS needed....
>
>
>I finally need to purchase the BFS needed to remove the crank pully
>nut from my 1500 spit engine....question is HOW BIG IS IT?? i would
>rather just buy the one socket versus the set...and question 2 is it
>available in 1/2 drive or do i need to rent a 3/4 drive impact gun....
>
>thanks as always.
>
>
>
>
>==
>larry (I hope someday to Drive my triumph) hooven 1979 spitfire
fm99248u,
>http://www.geocities.com/MotorCity/Speedway/9311/index.html
>"Second place is just the first loser" -John Force
>"Why is it all my american cars have metric bolts, and my british cars
are
>SAE?"
>"If you don't know where you are going, any road will take you there"
-the
>cheshire cat
>
>
>
|