I need to remove and inspect my fuel sending unit. The tank is almost
empty. I know that the sending unit is supposed to "unscrew". I'm just not
sure how to get ahold of something to twist without breaking something.
Surely this must be a fairly simple procedure.
I see three prong thingys sticking out and three dips on the inside diameter
of the sending unit backing plate, which I assume needs to be the part
that's turned. Or do I turn the part with the three tabs sticking out from
it?
Any tips or advice would be appreciated. TIA
Best wishes,
Jeff in San Diego
'67 RHD Spitfire Mk3 aka "Mrs. Jones"
Jeff's Classic '67 Spitfire Mk3 site & Vintage Spitfire Webring
http://www.ohms.com/spitfire/spitfire.shtml
home of the NEW Totally Triumph Auction
"By Triumph enthusiasts, for Triumph enthusiasts"
http://www.ohms.com/cgi-bin/TRauction.cgi
and... The Triumph Autos/Parts Wanted Listings
http://www.ohms.com/cgi-bin/TRwanted.cgi
...plus a few other surprises!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|