I never saw a reply so thought I'd also ask....
Does anyone have a template for both left & right parcel shelf's (i.e. glove
box)? My Spit didn't have either when I bought it and it's a pain trying to
piece one together w/ old cardboard and duct-tape.
Chris
-----Original Message-----
From: owner-spitfires@autox.team.net
[mailto:owner-spitfires@autox.team.net]On Behalf Of John Weber
Sent: Monday, July 03, 2000 11:52 PM
To: Spitfire (E-mail)
Subject: A Tale of Two Parcel Shelves
Or...
A Tale of One, And a Beg for the Other!
I found a source for 4 ply cardboard (non-weather treated) for the LH
parcel shelf.
I have the old one, so I can drill the rivets, lay it out flat, and
make a template to reproduce. The sheet of 4 ply is almost a perfect
match for the OEM, albiet a white color. Spray paint will fix that,
and the occasional wetness that it is bound to experience.
BTW, the 32x40 sheet of board was found at a local Beards (framing
shop) and cost $6.90 total (no tax in OR). I figure I can have the LH
parcel shelf templated, cut, assembled, glued, riveted and painted in
about 2 hours.
Now for the beg. Does anyone have a template for the RH parcel shelf?
Mine was in about 9 pieces and I threw them (stupidly) away.
I'll let the list know of the outcome of this.
John
'75 Spit
|