Re: clunk noise when taking up the drive

[reed mideke <rfm@cruzers.com>]

Vic Whitmore wrote:
> 
> Check the radius arm bushings at the rear wheel and on the body mount. If the
> bushing is worn, the arm will move back and forth and cause a clunk under
> acceleration. Then also check the u-joints on the propellor shaft and the 
>axles.
> 
Also check the bolts that hold the halfshafts and driveshaft to the
diff.


--
Reed Mideke                  rfm(at)cruzers.com
If that doesn't work:        rfm(at)portalofevil.com 
InterBase build instructions: www.cruzers.com/~rfm