spridgets
[Top] [All Lists]

Re: Wiper Motor Removal

To: Tyson Sherman <tsherman@tecinfo.com>
Subject: Re: Wiper Motor Removal
From: jphender@inav.net
Date: Mon, 10 Nov 1997 12:58:39 -0600 (CST)
Cc: Spridget Mailing List <spridgets@Autox.Team.Net>
In-reply-to: <199711091934.NAA10059@mars.tecinfo.com>
Reply-to: jphender@inav.net
Sender: owner-spridgets@Autox.Team.Net
Hi Tyson,

To remove the cable from the MOTOR, you have to remove the top from the
gearbox assembly attached to the motor.  The cable then lifts out of the
assembly. You can't pull the cable out the end.

Jim Henderson




On Sun, 9 Nov 1997, Tyson Sherman wrote:

> Hi list:
> What is the correct way to remove the cable from the
> wiper motor on a 73 Midget?  Pulling on the cable
> causes the wipers to wipe.  The cable seems to be
> pretty hard to get out too.
> Thanks!
> Tyson Sherman
> <http://www.tecinfo.com/~tsherman/>
> 


<Prev in Thread] Current Thread [Next in Thread>