3/8 X 24 for all alave cyls.
3/8 X 24 for all drum brake (4 wheel drum) models
3/8 X 24 for front disc calipers
1/4 X 28 for rear drums of disc brake models (64 and up)
Phil Vanner wrote:
> I know some listers have ordered Speedbleeders and I was wondering what size
>I will need. The Speedbleeders site lists sizes but not applications. In case
>anybody is wondering Speedbleeders are brake bleed nipples with a one-way
>valve built into them, so you can bleed brakes solo, by just loosening the
>nipple and pushing the brake pedal.
>
> If there is a difference for drum/disc cars I'd like to know that too. I
>currently have drums and I am getting the pieces together for disc conversion.
>I'll still have the older type drum brake in rear, so if that's different from
>the later drums, does anybody know that size?
>
> Phil Vanner
> Mk1 Midget
--
Frank Clarici Toms River, NJ
Too many LBCs
3 Sprites, an Austin A40, and an Austin Mini all on the road.
1 Jaguar XJ6 family car, 1 Racer Midget project , & 2 Parts Spridgets
Check out my home page at http://www.exit109.com/~spritenut
--------------------------------------------------------------------------------------------
|