On 2/15/99 2:57 AM so and so (pheysey) said. (And I quote:)
>I bought a 10" electric fan and have installed it. I have all the wiring
>done
>except that I am unsure of where I will get the power from. the instructions
>say to connect the wire into a source "after the ignition switch" What
>system
>would be able to handle the power drain. Also where and how did you mount
>the
>toggle switch.
>Thanks
>steve (ok with mechanical repair/ in the dark with electronics)
>78 midget
I wired mine to the left side (wing side) of the fusebox. I checked to
see what terminals were hot when the ignition switch was on. Mine has a
thermocouple that mounts in the radiator, not a toggle switch. But you
might try the hole where the rheostat for the dash lights is - if it's
like mine it never worked anyway.
Larry Macy
78 Midget
Larry B. Macy, Ph.D.
macy@bblmail.psycha.upenn.edu
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
In a world without walls or fences, what use do we have for windows or
gates?
|