spridgets
[Top] [All Lists]

Re: More Noises

To: chuckc <chuckc@ibm.net>
Subject: Re: More Noises
From: "Herbert Goede" <hgoede@uswest.com>
Date: Tue, 16 Feb 1999 12:49:08 -0700
Cc: Ulix Goettsch <ulix@u.washington.edu>, spridgets <spridgets@autox.team.net>
Organization: AMERICAN MGMT SYSTEMS
References: <Pine.OSF.4.05.9902120942390.21675-100000@saul1.u.washington.edu> <36C9B069.466AE27D@ibm.net>
Reply-to: "Herbert Goede" <hgoede@uswest.com>
Sender: owner-spridgets@autox.team.net
Chuck

This was probably a "factory" noise.  I'll give you the stock BL answer.  "Slow 
down
or get a better wireless".

All kidding aside, without hearing the noise it is hard to diagnose.  If the 
top is
up it could be the front rail seat.  If down it could be extranious holes or bad
grommets in your firewall or foot wells, bad winshield rubber, wing
mirrors..........  I traced a strange noise down to a crack in my carb heat 
shield
once.

Herb

chuckc wrote:

> Yup. Thanks, Ulix. The two rubber "feet" that come from the
> underside of the leading edge of the hood, are adjustable.
>
> Just moving them down a couple turns got rid of 80% of my
> spurious noises. Thaanks again!
>
> BTW, there are no lock nuts on those adjusting threads.
> Are they likely to vibrate back? Maybe some locktite?
>
> BTW, BTW ... now another strange noise becomes audible.
> Around 60-70mph, a high-pitched whistle. I tried moving my
> hand around the edges of the windscreen, wing windows,
> visors, etc, with no apparent changes. Ideas?
>
> chuck
>
> Ulix Goettsch wrote:
> >
> > Chuck,
> >
> > yes, that's what I was talking about.  Are the front rubbers adjustable?
> >
> > Ulix
> >
> > On Fri, 12 Feb 1999, chuckc wrote:
> >
> > > Ulix,
> > >
> > > There is one squar-ish rubber block on each side.
> > > Is that all there should be?
> > >
> > > chuck
> > >
> > > Ulix Goettsch wrote:
> > > >
> > > > Chuck,
> > > > I can't remember right now, but aren't the rubber stops adjustable in
> > > > height?  Do you have the rubber blocks at the side of the hood?
> > > > Ulix
> > > >
> > > > On Fri, 12 Feb 1999, chuckc wrote:
> > > >
> > > > > OK Gang,
> > > > >
> > > > > I got all the expensive noises sorted out and
> > > > > fixed. Now I'm hearing the little ones.
> > > > >
> > > > > Can anyone suggest a realistic solution to a
> > > > > noisy bonnet - er, hood? It seems to bang around
> > > > > a lot, probably on the fender - er, wing- supporting
> > > > > edges. There are small rubber (?) bumper blocks
> > > > > (1 on each side) but they don't seem to do much.
> > > > > When I hit bumps or rough pavement, the hood kinda
> > > > > clangs around noissily. Not nice.
> > > > >
> > > > > OTOH -- I can't believe the great top-down weather in
> > > > > February. I'm getting spoiled!
> > > > >
> > > > > chuck
> > > > >
> > > >
> > > >     Ulix                                       __/__,__      ___/__|\__
> > > > 
>..............................................(_o____o_)....<_O_____O_/...
> > > >                                               '67 Sprite     '74 X1/9
> > >
> >
> >     Ulix                                       __/__,__      ___/__|\__
> > ..............................................(_o____o_)....<_O_____O_/...
> >                                               '67 Sprite     '74 X1/9


<Prev in Thread] Current Thread [Next in Thread>