>The car was originally positive ground. Look at the face of the
tachometer,
>just above the center and see if it has "Positive Earth". If it does then
>look on the back of the tach, there should be a white wire that goes to a
>fitting on a post makes a loop (about 1/2" diameter) and then goes to the
fire
>wall. If this wire is intact, that is a single uncut piece of wire the car
is
>positive ground. If the wire has been cut near the loop then probable
someone
>has tried to convert it to negative ground.
Ok the wire on the tach is cut in half, no loop or nethein just danglin
there.. How do i fix the tach and is there another way to tell ifs its been
converted to neg ground?
Thanks again
Mike
|