spridgets
[Top] [All Lists]

clutch pin length

To: <spridgets@autox.team.net>, <mgs@autox.team.net>
Subject: clutch pin length
Date: Thu, 2 Mar 2000 12:05:29 -0500charset="iso-8859-1"
There are two different lengths of pins from the clutch slave cyl 
to the fork rod for the 948/1098 vs the 1275.

Does anyone know how much different in length they are?

I am beginning to suspect I have a pin that is too short forcing my
slave cyl. to be near the end of its bore just to get the 
clutch engaged.

A new clutch, fork and pivot bearing, throwout bearing, slave cyl.
and it still seems like I don't have enough throw to the cyl.

Can I swap one length pin for the other?


Paul Tegler  wizardz@toad.net        http://www.teglerizer.com 
OBie - '73 BGT - daily driver  
http://www.teglerizer.com/mgstuff/ob_description.htm
Punkin' - '78 Spitfire - corner ripping screamer 
http://www.teglerizer.com/triumphstuff/spit78.htm
Lil' Greenee - '73 RWA Midget - lady killer  
http://www.teglerizer.com/midgetstuff/index.html


<Prev in Thread] Current Thread [Next in Thread>