spridgets
[Top] [All Lists]

Re: 1275 Rod

To: "Gerard Chateauvieux" <pixelsmith@gerardsgarage.com>, <spridgets@autox.team.net>
Subject: Re: 1275 Rod
Date: Thu, 12 Jul 2001 18:28:34 -0700
References: <v03130316b773b523bd08@[209.24.234.148]>
Thanks Gerard, I know about the offsets but it looks like they are all the
same just reversed on two pistons. I haven't had any offers for any rods yet
though.
Jon

> >
> You should note that the rods have offsets. If you have the rod numbers
all
> on the same side, as you should (I'm not sure if you can flip them), you
> need to make sure they are in the right position. If you are not getting a
> number four rod, 2 and 4 and 1 and 3 are offset the same way.
>
> Gerard
>
> At 11:51 AM -0700 7/12/01, Jon Paschke wrote:
> >Hi All,
> >
> >I'm needing a rod for my 1275 Spridget motor. I have 3 of the AEG-625
Midget
> >rods but can't find a 4th. This number is cast into the rods so I want to
> >match it with another, also if I get a choice it is number 4 but I can
> >restamp. Thanks in advance, I expect to pay but hopefully not through the
> >nose. ;-)



<Prev in Thread] Current Thread [Next in Thread>