spridgets
[Top] [All Lists]

Re: 1959 or 1960?

To: Martin Cooper <cooper6@swbell.net>
Subject: Re: 1959 or 1960?
Date: Tue, 16 Oct 2001 16:57:54 -0700
Cc: jleclainche@home.com, spridgets@autox.team.net
References: <NEBBKGDAMLMANBJBNKEEEEHECMAA.jleclainche@home.com> <3BCCC032.9BD33627@earthlink.net> <3BCCC29A.561096F9@swbell.net>
Clarke Spares & Restoration
90 W. Swamp Rd. (Rt. 313)
Doylestown, PA 18901
Call Todd Clarke at (215) 348-0595
Fax: (215) 348-4160

Call Todd and he will send you a small catalog of parts, fasteners and 
services.  He
mainly specializes in MGAs, but his services for I.D. tags apply to all British 
cars.
He also sells the bronze bushing for the Spridget brake and clutch pedals and 4 
inch
wire hose clamps for the heater air intake for you purists.
Mike MacLean Supercharged 60 Sprite

Martin Cooper wrote:

> Mike,
>
> Can you supply the contact information for Clake Restorations.
>
> Martin Cooper
>
> Mike MacLean wrote:
>
> > Clarke restorations will stamp a repro chassis plate for the diagonal brace 
>to
> > the left of the engine with authentic British lettered dies.  It's up to 
>you to
> > provide the most authentic looking chassis plate for Todd to stamp.  The 
>engine
> > plate he makes and stamps is a dead-on ringer for the original.  The body 
>plates
> > in the door frames can be made, but Todd does not have the correct size 
>number
> > stamp dies for these.  The ones he does have are close and only a concours 
>judge
> > would know the difference.
> > Mike MacLean Supercharged 60 Sprite
> >
> > Jacques Le Clainche wrote:
> >
> > > Thanks, Mike... I finally got all the right numbers from my car 
>(Car/chassis
> > > number and body number)- thanks to the original engine number which was 
>used
> > > to register the car with the DMV in 1959... I just got the BMIHT 
>"certified
> > > copy of a factory record" today. Yeahhh!
> > >
> > > I assume I can get the car/chassis and body number plates from Clarke
> > > Restorations?
> > >
> > > Jacques



<Prev in Thread] Current Thread [Next in Thread>