Bill,
Not sure about taking one loop of of back of tach.
There is a white wire on back of tach that does loop
around twice. No idea why something about magnetic
fields probably. I like your idea about adjustment
however. Thnaks.
--- Bill L <pythias@pacifier.com> wrote:
> Hello James,
>
> been there,
> James,
> been there.. i'm not much of a mech, so if you
> can what you did
> already you can do the next thing.
>
> take the tach out of the dash.
> take the back off
> you will find a little adjustment screw
> inside. its fairly
> obvious.
> mark the back of the case and drill a hole to
> line up with that
> screw big enough for a "tweaker" screwdriver
> to fit thru
> put the back back, then put the tach back in
> car.
> now you can adjust the tach, on the fly, or
> hook up a dwell
> meter and "dial in the tach".
>
> taking one loop off the back of the tach seems
> to work for some
> people, but it didn't work for me. i think it
> adds "stability"
> to the readings.
>
> good luck! you can do it!
Send FREE Valentine eCards with Yahoo! Greetings!
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|