spridgets
[Top] [All Lists]

Re: Carb Gasket Material

To: Jim Rogers <jarplanner@cox.net>, "bugeye@yahoogroups.com" <bugeye@yahoogroups.com>, Spridget Group <spridgets@autox.team.net>
Subject: Re: Carb Gasket Material
Date: Mon, 31 Mar 2003 16:00:59 -0800 (PST)
--- Jim Rogers <jarplanner@cox.net> wrote:
> I need to add 1 or 2 thicker gaskets between the
> intake manifold & HIF6
> SU carb (throttle link rubs against manifold).
> Already have a 1/2"
> spacer but need another 1/8"-1/4" to clear manifold.
> Only thick
> materials (1/8") found so far are cork & neoprene. 
> 
> Any suggestions as to best material to use? Issues
> with gas? heat? I
> really don't want anything
> dissolving/leaking/catching fire down the
> road.
> 
> Thanks for any recommendations or experiences in
> this area.
> 
> Jim Rogers
> San Juan Capistrano
> 

Jim,
   Get another 1/2 inch spacer and cut it in 2 halves.
 If you can't do it, stop by a machine shop.  Will the
mounting studs by long enough with the extra length??
>

__________________________________________________
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>